- Adjustable CV 15W DC Step Up Driver 50V QSKJ IN.DC.5-32V OUT.DC.5-50V
Use China XLsemi XL6009 Max 4.0 Ampere
Output Umumnya Max di 50 Volt DC
High-power LED NON constant current driver
solar panels and wind turbines
For LED constant current driver usage
Make sure operating current and Max operating Voltage of the LED you need to drive.
Adjust the constant voltage potentiometer to make sure the out put Voltage is up to LED Max operating Voltage.
(1,2,3,4 steps to connect the power module input and output load does not take LED.)
Non-isolated Step-Up constant voltage module (CV)
Input voltage 5-32V
Output voltage continuously adjustable (5-50V)
Minimum Voltage difference 2V
Output current rated 2A, (more than 15W, please install the heat sink)
Size ultra-small size 49 (L) 23.4 (W) 11.4 (H) mm (without potentiometer)
Output power natural cooling 15W, 25W with heatsink
Conversion efficiency up to 92% (output voltage higher, higher the efficiency)
Output ripple 20M bandwidth (for reference only)
Operating temperature Industrial grade (-40C to +85C )
(ambient temperature exceeds 40 degrees, lower power use, or add one heatsink)
Full load temperature rise 45 C
No-load Current Typical 10mA
Load regulation 1%
Voltage regulation 0.5%
Dynamic response speed 5% 200uS
Potentiometer adjustment direction clockwise (increase), counterclockwise (decrease)
Input reverse polarity protection No, please comply with our plate or in the input reverse polarity protection diode in series.
Connection mode welded, plus pin can be directly soldered on the PCB to matching pin, radiator, shell.